How to Fix an N58plus Stuck on the Logo Screen

How to Fix an N58plus Stuck on the Logo Screen

If your N58plus radio is stuck on the logo screen and constantly restarts, don’t worry—you’re not alone. This issue can usually be resolved by reflashing the firmware. While it may sound intimidating, the process is straightforward if you follow the right resources.

Why This Happens

Boot-looping (when the device gets stuck restarting) is often the result of a corrupted or incomplete firmware installation. Reflashing essentially reinstalls the system software, giving your device a fresh start.

Step-by-Step Resources

Here are the official resources you’ll need to successfully reflash your N58plus:

  1. Full Preparation Guide
    Download & Watch
    This guide walks you through file extraction, tool installation, important precautions, and detailed flashing steps. It also includes a screen recording of the flashing tool in action.

  2. Live Demonstration
    Watch the Real Process
    A real-world video showing the firmware flashing process from start to finish.

  3. Complete Written Manual
    Read the Full Instructions
    A text-based manual that consolidates all steps and important notes from the video guides.

  4. Firmware File (N58 A4E18 Only)
    Download Firmware
    ⚠️ Important: This firmware is only for the N58 A4E18 version. Make sure your device matches this model before flashing.

Final Tips

  • Double-check your device version before applying firmware.

  • Ensure the flashing tool recognizes your device before starting.

  • Don’t disconnect the cable or power off the radio during the flashing process.

Once completed, your N58plus should boot normally again, free from the endless restart loop.

Reading next

What to Do if Your Radio Won’t Power On

Leave a comment

All comments are moderated before being published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.