Every technology enthusiast knows the uneasy feeling when a trusted device suddenly becomes unresponsive, especially after an update. If you're facing such an issue with your Talkpod A36plus, rest assured, there's a way out. Here's a step-by-step guide to bringing your A36plus back to life.
-
Entering the A36plus Reset Mode:
- Begin by simultaneously pressing the function key and the top alarm button on your A36plus.
- While holding these buttons down, power on the radio.
- A white screen should appear on your A36plus. This is a good sign as it indicates you've entered the reset mode.
-
Connect the A36plus to Your Computer: With the A36plus now in reset mode, use the designated cable to connect it to your computer.
-
Locate the A36plus Update Folder: On your computer, navigate to the A36plus update folder. For instance, if you're restoring it to version 1.20, you'll want to locate and open that folder.
-
Initiate the A36plus Restoration Process: Once you've chosen your connection cable from the given options, click on the topmost selection to begin the firmware update. At this point, the screen of your A36plus will intermittently flash white, signaling that the update is underway.
-
Awaiting the Restoration Completion: Once the flashing ends and the update completes, your Talkpod A36plus should reboot and return to its regular operational state.
To wrap up, firmware challenges, though rare, can be daunting. However, the Talkpod A36plus is designed with user-friendly recovery solutions. Always ensure to follow update instructions carefully and use the designated firmware to avoid potential glitches.
4 comments
Roman Kol
john
I have a talkpod A36Plus that worked fine in V 1.24.
The programming software and Chirp communicated with the device.
I have implemented V1.25 in the device.
Since then, neither the Talkpod programming software nor CHIRP works with the device.
Only manual programming works, which is annoying and takes too long.
Your procedure for resetting the device doesn’t work either.
What do you call the “function key” – is it the menu key?
Do you have a solution to get the unit working normally again?
Thanks.
John
Lee
Lee
My radio is bricked after doing a software update. Can not figure out how to Power Cycle my radio. Instruction in this Blog doesn’t really explain the Keys to depress, Talking to Talkpod, by text, they are not using radio terminology in defining what Keys to Press. A couple of examples; Site Key and Function Key. What keys are these? The only Keys that makes sense are the the Alarm button and PTT. Hopefully someone knows how to Unbrick the A36 Plus.
Leave a comment
All comments are moderated before being published.
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.